Viton Material for O-Rings, Molded Rubber, and Gaskets

Viton® fluoroelastomer is well known for its excellent resistance to aggressive fuels and chemicals, high heat (400°F/200°C), abrasions and cuts. Viton® also offers superb mechanical properties and can meet many performance specifications. Particularly valued for its excellent heat stability and resistance to aggressive fuels and chemicals, Viton® is the most specified fluoroelastomer for fuel system seals and hoses, O-rings, shaft seals, expansion joints and gaskets.

Viton® rubber is good for a broad spectrum of applications in the automotive, chemical processing and industrial markets, including: Chemical resistant gaskets and Viton® seals, High temperature Viton® gaskets, Viton® o-ring, and Lathe-cut Viton® gaskets and seals.

Please contact Seal & Design to discuss your application needs and how Viton material and seals can benefit your application.

Seal & Deisgn at the Design-2-Part Show in Akron, Ohio

Mark your calendars for the Design-2-Part show taking place September 19 & 20, 2012 in Akron Ohio.

Design-2-Part is the largest design and contract manufacturing show in the greater Ohio area. Manufacturers nationwide rely on Design-2-Part Shows as the most efficient place to meet high quality, reliable American job shops and contract manufacturers.  Attendees can view actual samples of products that have been produced for other OEMs in their industry and can get instant answers on current projects and compare quality, pricing, and lead times from multiple vendors all in a few hours.

On September 19-20 be sure to check out the Seal & Design at Booth #501 with our newest team member, Outside Sales Engineer Don Sweigert. He will be on hand to answer questions and show sample products and materials from Seal & Design’s extensive gasket, o-ring, seals, and molded rubber product lineup.

Click the thumbnail below for a floor plan of the Design-2-Part tradeshow:

 

 

 

 

 

 

Visit the official website of Design-2-Part Shows. We hope to see you in Akron!

Appalachian Gas Measurement Short Course

Appalachian Gas Measurement Short Course

Seal & Design has been invited to display their products at the Appalachian Gas Measurement Short Course.  The exhibit dates are August 14, 15, and 16th  at Robert Morris University in Pittsburgh, PA. We will be highlighting our high-end rubber compounds in HNBR, Viton, Aflas, Chermaz, Simriz, and Perlast Elastomers.

Viton & Buna Quad Rings

Quad Rings

Quad Ring Seals are four lipped seals with a specially developed sealing profile. A wide range of elastomer materials for both standard and special applications allows practically all liquid and gaseous media to be sealed.

 

Advantage:

Quad Rings/X-Rings have the following advantages compared to an Oring:

  • Avoids twisting in the groove. Due to its special profile, the seal does not tend to roll in the groove during reciprocating movement.
  • Low friction.
  • Very good sealing efficiency. Due to an improved pressure profile over Quad Ring Seal cross-section, a high sealing effect is achieved.
  • A lubricant reservoir formed between the sealing lips improves start up.
  • Unlike an O-Ring, the mold line flash lies in the trough, between and away from the critical sealing lips.

For more information or to request a quote please check out our website sealanddesign.com

Viton O-rings

Seal & Design stocks Viton® O-rings in black, brown and green colors. Fluorocarbon (FKM, FPM, Viton®) compounds available, and all DuPont family series of polymer such as A-type, B-type, GF, GFG, GLT, GFLT.

Standard molded sizes are manufactured to AS568, JIS B2401 & we also mold to non-standard sizes.  Please contact Seal & Design for any of your Viton® seal needs.

Poron Urethane Foam

High performance cushioning materials for multiple footwear and fashion applications

PORON® Urethanes are available in a wide variety of colors, thicknesses, densities and surface textures to accommodate almost any activity, from everyday use to the rigorous demands of high-impact sports and exercise. And if the precise PORON material doesn’t already exist, one can be custom formulated for the needs of a specific manufacturer’s physical and aesthetic requirements.

  • Maximum retention of comfort and flexibility PORON urethanes are made without plasticizers, which means the material will not shrink or become brittle and crack with age. PORON urethanes retain “like-new” softness and flexibility.
  • The highest degree of impact absorption More shock absorption means less impact to feet and joints. In side-by-side drop weight tests, PORON materials outperformed vinyl sponge, neoprene sponge, sponge rubber, latex foam and solid viscoelastic.
  • A breathable layer to help feet stay dry and cool  PORON urethane materials form permeable layers that draw water vapor and perspiration away.

Please contact Seal & Design for more info!